CLICK HERE TO VIEW WHISPERGREEN SELECT VIDEOS
Panasonic WhisperGreen Select Bathroom Fan - FV-05-11VK1 - 50, 80, or 110 CFM
REPLACES MODEL FV-05VK3, FV-08VK3, FV-11VK3
The new WhisperGreen Select Bathroom Fans from Panasonic offer a customizable ventilation solution that is energy efficient and feature-rich. The FV-05-11VK1 base model provides a single fan which can be customized or used as is - with the choice of 50, 80, or 110 CFM. The Pick-A-Flow speed selector allows you to change the CFM rating on-the-fly. The WhisperGreen Select fans are built using DC motor technology. The DC motor is 30-70% more energy efficient than the minimum ENERGYSTAR requirements. The WhisperGreen Select fans are the most technologically advanced and energy efficient products available!
- Can be customized using Plug 'N Play Modules (more info below)
- Integrated dual 4" or 6" duct adaptor
- New Flex-Z Fast bracket makes installation easier than ever - the bracket accomodates joist spacing up to 24" on center
- Fits in 2x8 construction
- Duct collar / junction box assembly is completely removeable to make installation of ducting and electrical simple
- DC motor with SmartFlow technology ensures consistent and optimal CFM output
- UL listed for tub/shower enclosure when used with a GFCI protected circuit
- 6 Year Warranty on DC Motor, 4 years on parts
OPTIONAL PLUG 'N PLAY MODULES
This fan can accept up to 3 Plug 'N Play Modules, which are described below
Multi-speed Module with High/Low Delay Timer - FV-VS15VK1 - Allows the fan to run continuously at lower speeds to maintain ventilation standards to meet indoor air quality (IAQ) and then boost up to high speed for "spot ventilation" when moisture or odor is present. The multi-speed module offers adjustable dials to configure appropriate level of lowspeed airflow (CFM) and a time delay for return to the low speed after the boost.
SmartAction Motion Sensor Module - FV-MSVK1 - Turns the fan on or booster to a higher speed when motion is detected when used in combination with the FV-VS15VK1 multi-speed module. The motion sensor is pre-set to run the fan for 20 minutes; it will then re-check for movement; if detected the fan will run for another 20 minute cycle.
Condensation Sensor Module - FV-CSVK1 - Turns the fan on or boosts to a higher speed when used in combination with the FV-VS15VK1 multi-speed module. The condensation sensor works based on calculations from the psychrometric chart - or combination of relative humidity (RH) and temperature. This allows the fan to anticipate the formation of condensation and automatically turn on when needed to expel humid air. The condensation is pre-set to run for 20 minutes; it will then check the RH and temperature to detect if the fan needs to run for another 20 minute cycle.
NiteGlo LED Night Light Module - FV-NLVK1 - automatically turns on with ambient light levels are met. Turning the dial on the module to "DARK" is ideal if the fan is in an isolated room with little ambient light from nearby rooms. Turning the dial to "BRIGHT" is ideal if there is light spill from adjacent rooms. This module is only recommended when using in conjunction with other modules or when power is being run directly to the fan and the red control loop wires are being used to turn on the fan.