ETC-111000 - Electronic Temperature Control for Heating OR Cooling Applications
Single Stage with Sensor
Range: -30F to +220F
Differential: 1F to 30F
Power: 120 or 208/240 VAC
Output: SPDT Relay
An electronic temperature control for commercial HVAC/R at a surprisingly affordable price.
The RANCO ETC is a microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications. With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the ETC is one of the most versatile temperature controls available.
Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1F resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display.
REMOTE TEMPERATURE SENSING
Include remote sensor comes with 10 foot cord. The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire.
Every ETC model is equipped with diagnostic programs that check for hardware, software or system problems and display different error codes to indicate where the trouble is.
The ETC also has a keypad lockout switch to prevent tampering with the control setting by unauthorized personnel The switch, which is located inside the enclosure, can be used to disable the keypad function.
MAXIMUM APPLICATION FLEXIBILITY
Wide temperature range (-30F to 220F) and differential adjustment (1F to 30F)
Available in one and two stage models.
Accepts 120/208/240 volt input.
User selectable heating/cooling modes for use in hundreds of applications.
Replaces most electromechanical and electronic temperature controls.
Keypad lockout switch prevents tampering.
EEPROM memory retains control settings during power outage.
On power up, time delay protects equipment from simultaneous restarts.