Comments about Replacement Drum and Media Assembly for Skuttle Model 190 Humidifier (A16-1722-020):

Easy to put together, easy to remove & install, easy to get rid of calcium buildup from hard water

Comments about Replacement Drum and Media Assembly for Skuttle Model 190 Humidifier (A16-1722-020):

I used this to repair my old Ward duct humidifier. The new steel rod was a bit short for this model, so I just used the original rod from the broken drum assembly.[...] My unit is now working and I would recommend this company again.

Comments about Replacement Drum and Media Assembly for Skuttle Model 190 Humidifier (A16-1722-020):

Easy to assemble; all parts were included.

Comments about Replacement Drum and Media Assembly for Skuttle Model 190 Humidifier (A16-1722-020):

Since the filter is folded flat, it renders the whole assembly slightly asymmetrical. In my case (due to a partial motor shaft failure) the rotor sometimes gets stuck because of that asymmetry. And when the filter is dry, the hot air flow can melt the drum plastic (that is also possible when water supply is cut). "I'm not so rich to buy cheap stuff" - I should have remember this phrase when I bought a cheap humidifier. Since then I had to buy 2 rotors, ~$40 each... On the next failure I will consider buying a better (hence more expensive) humidifier, ideally without moving parts.

Comments about Replacement Drum and Media Assembly for Skuttle Model 190 Humidifier (A16-1722-020):

Piece of cake removing the old and installing the new "drum" and media.