You Are Here: Home > Products > Thermostats & Controls > Thermostats > 1 Heat/1 Cool > LuxPro PSP611 1 Heat / 1 Cool Programmable Thermostat With Humidity Display
LuxPro PSP611 1 Heat / 1 Cool Programmable Thermostat With Humidity Display

click to zoom
(4 more images)

Standard: 2-7 Business Days: Free!

* Prices reflect shipping fees for a quantity of (1)

LuxPro PSP611 Programmable Thermostat With Humidity Display.  5+1+1 programming with 4 program periods per day.

  • Small elegant design
  • Displays relative humidity - just press the "H" button
  • Exclusive LUX Speed Dial®
  •  "EL" Illuminated Display
  •  Comprehensive Graphical Filter Monitor
  • 5-1-1 Day Programming
  • Energy Star Compliant
  • 4 Periods Per Day
  • Battery Free Memory Storage
  • Temporary Temperature Override
  • Temperature Hold
  • Keyboard Lockout
  • F/C Temperature Display
  • 12/24 Hr Clock Display
  • Adjustable Temperature Differential / Cycle Rate
  • User Temperature Offset / Calibration
  • System or Battery Powered
  • 5/2 Minute Selectable Minimum
  • Run/Off Time For Short Cycle and Compressor Protection
  • Dual power - hardwire or battery
  • 3-Year Warranty

Most 24V Heating and A/C Systems
1 Stage Heat/1 Stage Cool: Gas, Oil, Electric, or Single Stage Heat Pump Systems
2 Wire Heat Only Hydronic Systems (Hot Water Baseboard & Radiator)
Millivolt Systems (Wall Heaters / Furnaces & Gas Fireplaces)


Electrical Ratings: 1.5 AMPS at 24 VAC
Battery Powered: 2 "AA" Alkaline Batteries (included)
WARNING: Use Energizer® or DURACELL® Alkaline Batteries Only.
Temperature Differential: Adjustable from .25°F to 2.25°F.
Lighted Display: Celsius and 12/24 HR. Time Capable.
Accuracy: ±1°F over a range of 45°F to 90°F.
Temperature Control Range: 45°F to 90°F (7°C to 32°C).
Temperature Display Range: 23°F to 99°F (-5°C to 37°C).
Compatibilities: 1 Stage Heat / 1 Stage Cool: Gas, Oil, Electric or Single Stage Heat Pump Systems. 2 Wire Hydronic Systems and Hydronic Air Handling Systems.
Terminals: RH, RC, W, Y, G, O, B, C, Solid Pin Connections Allow usage for 24V and Millivolt Systems.
Program Settings: 4 Preset Programs Per Day Heating and Cooling. All may be Easily Reprogrammed in 1° F/C and 15
Minute Increments. Technical Service Number Listed for Help in Reprogramming.
Circuit Protection: Circuit Protection is Built-in, No Isolation Relays Required.
Compressor Protection: Built-in 5 Minute Time Delay
Environmental Limits: Moisture and Dust: meets IP20. Operating Humidity: 20% to 90% non-condensing.
Operating Temperature: 14°F to 122°F (-10°C to 50°C).
Storage Temperature: -4°F to 140°F (-20°C to 60°C).
Electrical Immunity: meets relevant EMI/EMC specifications.
Dimensions: 4.9" (125mm) wide x 3.2" (80mm) tall x 1.3" (33mm) deep