Fantech Whole House HEPA Filtration System (CM3000)

Fantech provides an added solution for better indoor air quality with the Whole House HEPA filtration unit. This small, compact unit installs on the existing ductwork of your furnace/air handler or can be used as an independent system mounted in the attic, crawl space or closet. It is designed to clean and filter the total volume of air in an average 2200 sq. ft. house once an hour. Larger homes will take slightly longer for complete air change. Mold spores,pet dander, cooking odors, dust, dust  mites and their by-products are all captured in a series of three filters. The prefilter collects the largest particles while the carbon filter absorbs odors. The third filter is a true, certified HEPA filter which collects particles down to 0.3 microns.

Consumers continue to look for ways to keep their family’s home safe and comfortable. Fantech’s Whole House HEPA Filtration System features a certified HEPA filter designed to be 99.7% effective at removing particles down to 0.3 microns and larger, which means dust mites, mold spores and viruses are virtually eliminated.

-Cleans the total volume of air in a home each hour (up to 3600 sq ft home)

-Significantly reduces pet dander, cooking odors and smoke particles

-Collar mount model - comes with four collars, two pieces of UL Listed 8" flex duct and hanging chains.

-Powerful 240 CFM fan directs air through three filters

Unit Size
CM3000 – 20" x 16" x 10.5" (2) 8" diameter ports
Motor:
Powerful German manufactured EBM external rotor motorized impeller with permanently lubricated ball bearings for long life and vibration free operation. Delivers 240 cfm air flow.
Electrical
Prewired with 5’ cord and 3-prong plug. 115 volts; 1.0 amps.  Can be switched with air handler/furnace using relay.  Can also be switched on demand or using timer in standalone applications.
Filters
Easy to replace. No tools needed. Pre-Filter captures larger particles. Replace every three months Carbon Filter absorbs odors and gases. Replace every three months HEPA filter - 99.97% effective down to 0.3 microns. Specially designed to be the least expensive HEPA filter to replace. Lasts 2 to 5 years depending on proper maintenance of the pre-filters.*
*Homes with a high level of pollutants (such as a heavy smoker) will need to change the filter more often.

Installation
Units easily install horizontally or vertically on the return air side duct of your furnace or air handler. Collar mount model - comes with four collars, two pieces of UL Listed 8" flex duct and hanging chains. Air is directed through the bypass HEPA which allows the heating/cooling system to easily deliver clean, fresh healthy air throughout the entire home. 



The CM3000 is typically tied into a central air handler/furnace, but can also operate as a stand alone unit.