Questions? Call Toll Free (866) 764-9900
||Free Indoor Digital Hygrothermometer included with each Dri-Eaz Dehumidifier |
The new CMC100 (AKA F391-A) is a compact, professional-grade dehumidifier specially designed for confined spaces, high performance, and easy installation. The versatile CMC100 is ideal for controlling moisture in humid basements, crawlspaces, commercial facilities, sensitive technology areas, or medical settings. With built-in humidistat and easy digital controls, the CMC100 keeps operation simple.
Compact Dimensions - the shortest verticle clearance on the market in applications where condensate pump-out is required. Just 10" wide and 14" tall (including built in condensate pump which offers 30" of lift).
Convenient Installation - Fits easily between floor joists, in low clearance areas or on a basement bookshelf
Unmatched flexibility - Unique interchangeable panel design allows for multiple airflow configurations:
- Straight path tunnel design
- U-Shaped - air intake/outlet on one side
- L-Shaped - combination of tunnel and U-shaped
- 6" Collar for duct connection on exhaust side
Built-In pump - no external pump needed. Unit automatically pumps condensate to suitable receptacle or drain - can even pump uphill (30 inches vertical lift potential - do not place the end of the drain hose higher than 3 feet (1 meter) above the top of the CMC, or leaking may occur.)
EnergyStar qualified - high performance - 70 pints a day water removal while drawing just 6 amps
The CMC100 is controlled by an electronic touchpad humidistat. The unit will automatically start when the humidity of the surrounding air exceeds the humidity level selected. The humidistat displays the current humidity as a percentage of relative humidity. Press the up or down buttons to adjust the humidity setpoint. The value of the humidity setpoint increases or decreases in 5 percent increments.
The CMC100 also has a defrost mode and low temperature protection mode. The unit automatically initates these modes as conditions warrant. As needed, the CMC100 will automatically enter the defrost mode - the fan will continue to operate until ready for the next operating cycle. When the ambient teperature falls below 32 degress, the unit enters low temperature protection mode and stops operating. Note - unit retains humidity setpoint even after power outage.
1 Year Warranty on Parts and Labor
Four screw-in leveling feet
One 15-foot drain hose (5/8" ID)
One hose clamp for attaching drain hose
Name: CMC100 Dehumidifier - Model F391-A
Dimensions (W x H x D) - 10" X 14" X 24"
Weight - 55 lbs
Fan - 250 CFM
Water Removal - 70 pints / day at AHAM
Power - 6.2 Amps (115V)
Water Removal Efficiency - 4.6 pts/kWh
Energy Factor - 2.1L/kWh
Operating Temperature Range - 33-100 degrees F
Safety - ETL certified to UL 474
Power Cord Length - 8 feet
***Note: Our shipping arrangement for the Santa Fe includes palletizing and shipping via an LTL freight carrier. There is a very high risk of damage when the unit is shipped via a small package carrier such as UPS. This shipping offer includes "to the curb" delivery. Freight carrier will call to set up a delivery window and someone must be present to sign for the delivery.
Click here for more shipping details on the Dri-Eaz dehumidifier.
National Trade Supply, LLC is an authorized Dri-Eaz distributor. We stock the Dri-Eaz products and accessories in our own facility providing you with a quicker turnaround time and instant tracking information on your order. We have installed Dri-Eaz units in a variety of applications and can offer expert advice on how to properly install yours. We are also an authorized service center for Dri-Eaz products and can offer warranty service and replacement parts.
Whenever there is a need for fast, dependable, energy-efficient drying, Dri-Eaz and National Trade Supply can provide the solution.