You Are Here: Home > Products > Specialty Thermostats > Thermostats for Landlords > Braeburn Model 5220 Multistage Programmable Thermostat
Braeburn Model 5220 Multistage Programmable Thermostat

click to zoom

In Stock
Standard: 2-7 Business Days: Free!

* Prices reflect shipping fees for a quantity of (1)

Braeburn Model 5220 Multistage Programmable Thermostat - Replaces Model 5200.

  • Excellent choice for property owners who need to control their heating and cooling bills!

The universal auto changeover thermostat shall be a Braeburn® model number 5220, 3.86" high x 5.11" wide x 1.42" deep, powered with either 24 Volt AC or with two "AA" Alkaline batteries (3.0 Volt DC). In the event of a power failure, the unit shall retain all user, installer and program settings. The thermostat shall be compatible with low voltage single stage or multi-stage gas, oil, or electric conventional heating or cooling systems with up to two stages of heating and two stages of cooling, and heat pump systems with up to three stages of heating and two stages of cooling. Also compatible with 250mv - 750mv millivolt heating only systems and 2 or 3 wire hydronic zone systems. The thermostat shall have a bright blue backlight display, SpeedBar®, separate sub-base and multi-level keypad lockout. Temperature control range shall be between 45° and 90° F (7° and 32° C), accuracy of +/- 1° F (+/- .5° C). Operating humidity range between 5% and 95% relative humidity. The thermostat shall include separate installer and user setup modes, residential or commercial setup modes, permanent non-volatile memory to retain user settings, ?lter, UV and humidi?er pad check monitor, adaptive recovery mode (ARMT), programmable fan mode, residual cooling fan delay, indoor or outdoor remote sensor capability, auxiliary heat fossil fuel programming, and compressor power outage protection. A front reset button will return user settings to default values when pressed. Meets California Title 24 and Energy Aware® Guidelines.


. Large 5 Sq. In. Display with Bright Blue Backlight
. 7 Day, 5-2 Day or Non-Programmable
. Programmable Fan with On or Auto Modes
. Auto or Manual Changeover
. SpeedBar  Multi-Function Button
. Adaptive Recovery Mode (ARM )
. Adjustable Temperature Limits
. Auxiliary Heat Fossil Fuel Options
. Indoor or Outdoor Remote Sensing
. Residential and Commercial Modes
. Temporary Override Limits
. Permanent Memory Retains Settings
. Separate User and Installer Reset Buttons
. User Selectable Service Monitors
. Hardwire or Battery Powered
. Multi-Level Keypad Lockout
. Set Point Adjustment Limits
. Compressor Short Cycle Protection
. Compatible with 2 or 3 Wire Hydronic Zone Systems


Dimensions: 3.86" x 5.11" x 1.42"
Electric Rating: 24 Volt AC (18-30 Volt AC)
1 amp maximum load per terminal
3 amp total maximum load (all terminals)
AC Power: 18-30 Volt AC
DC Power: 3.0 Volts DC
(2 "AA" Alkaline batteries included)
Compatibility: Heat pump systems up to 3 heat/2 cool, conventional systems up to 2 heat/2 cool, 250mv - 750mv millivolt heating systems
Control Range: 45° to 90° F (7° to 32° C)
Display Range: 40° to 99° F (5° to 37° C)
Accuracy: +/- 1° F (+/- .5° C)
Differential: .5°, 1°, or 2° F (0.2°, 0.5°, or 1° C)
Storage Temperature: 14° to 140° F (-10° to 60° C)
Operating Humidity: 5% to 95% Relative Humidity
Terminations: G, Rc, Rh, W2, O/B/V3, Y1, Y2, W1/E/W3, C, L, S1, S2