You Are Here: Home > Products > Thermostats & Controls > Thermostats > 1 Heat/1 Cool > Braeburn Model 5020 1 Heat/1 Cool Programmable Thermostat
Braeburn Model 5020 1 Heat/1 Cool Programmable Thermostat

click to zoom

In Stock
Standard: 2-7 Business Days: Free!

* Prices reflect shipping fees for a quantity of (1)

Braeburn Model 5020 1 Heat/1 Cool Programmable Thermostat

  • Excellent choice for property owners who need to control their heating and cooling bills!

The universal auto changeover thermostat shall be a Braeburn® model number 5020, 3.86" high x 5.11" wide x 1.42" deep, powered with either 24 Volt AC or with two "AA" Alkaline batteries (3.0 Volt DC). In the event of a power failure, the unit shall retain all user, installer and program settings. The thermostat shall be compatible with low voltage single stage gas, oil, or electric heating or cooling systems, and single stage heat pump systems. Also compatible with 250mv - 750mv millivolt heating only systems and 2 or 3 wire hydronic zone systems. The thermostat shall have a bright blue backlight display, SpeedBar®, separate sub-base and multi-level keypad lockout.  Temperature control range shall be between 45° and 90° F (7° and 32° C), accuracy of +/- 1° F (+/- .5° C) and operating humidity range between 5% and 95% relative  humidity. The thermostat shall include separate installer and user setup modes, permanent non-volatile memory to retain user settings, filter, UV and humidifier pad check  monitor, adaptive recovery mode (ARM), programmable fan mode, residual cooling fan delay and indoor or outdoor remote sensor capability. A front reset button will return user settings to default values when pressed. This thermostat shall meet California Title 24 Guidelines.


. Large 5 Sq. In. Display with Bright Blue Backlight
. 7 Day, 5-2 Day or Non-Programmable
. Programmable Fan with On or Auto Modes
. Auto or Manual Changeover
. SpeedBar  Multi-Function Button
. Adaptive Recovery Mode (ARM )
. Adjustable Temperature Limits
. Indoor or Outdoor Remote Sensing
. Residential and Commercial Modes
. Temporary Override Limits
. Permanent Memory Retains Settings
. Separate User and Installer Reset Buttons
. User Selectable Service Monitors
. Hardwire or Battery Powered
. Multi-Level Keypad Lockout
. Set Point Adjustment Limits
. Compressor Short Cycle Protection
. Compatible with 2 or 3 Wire Hydronic Zone Systems


Dimensions: 3.86" x 5.11" x 1.42"
Electric Rating: 24 Volt AC (18-30 Volt AC)
1 amp maximum load per terminal
3 amp total maximum load (all terminals)
AC Power: 18-30 Volt AC
DC Power: 3.0 Volts DC
(2 "AA" Alkaline batteries included)
Compatibility: Single stage gas, oil or electric systems
Single stage heat pump systems
250mv - 750mv millivolt heating systems
Control Range: 45° to 90° F (7° to 32° C)
Display Range: 40° to 99° F (5° to 37° C)
Accuracy: +/- 1° F (+/- .5° C)
Differential: .5°, 1°, or 2° F (0.2°, 0.5°, or 1° C)
Storage Temperature: 14° to 140° F (-10° to 60° C)
Operating Humidity: 5% to 95% Relative Humidity
Terminations: Rc, Rh, O/B/V3, Y1, W1, G, C, S1, S2