Buy the Honeywell M847D1012 Replacement Damper Actuator Motor on http://iaqsource.com Print This PagePrint This Page
Honeywell M847D1012 Replacement Damper Actuator Motor image
 
(based on 10 ratings)
Read All Reviews
Brand: Honeywell
Located in: Dampers, Replacement Damper Motors
The M847D is a two position, 24 Vac spring return, direct mount actuator designed to operate ARD and ZD zone dampers. FEATURES: . Low voltage, spring-return damper actuator . Equipped with anti-rotation and drive shaft extensions for direct mounting to 7/16 inch diameter coupling style dampers. . Adjustable range stops. . Size (inch) - 3-1/2 inch high x 2-3/8 inch wide x 3-3/8 inch deep . Motor Mount - Direct connection to damper shaft . Motor Type - spring return (damper can be either spring open or spring closed) . Wires to Motor - 2 wires . Other Motor Information - Two Position, spst;60 in.-oz (423 mNm) at spring returned initial start position; 90 degrees rotation;Spring Return - 10 seconds de-energized, 30 seconds energized . Electrical Connections - 2 wires . Frequency - 60 Hz . Replaces - RDMH damper actuators; RDMZ damper actuators . Includes - Anti-rotation and drive shaft extensions bag assembly to be compatible with ZD and ARD dampers . Used With - ZD dampers; ARD dampers . Used in Trolatemp systems . REPLACES HONEYWELL M847D1004
More information for the Honeywell M847D1012 Replacement Damper Actuator Motor
Review Snapshot®
Avg. Customer Rating:
 
5 stars
(based on 10 reviews)
100% of respondents would recommend this to a friend.

Customers most agreed on the following attributes:

Pros:
Easily understood instructions(6), Easy installation(9), Excellent interface(4)
Best Uses:
Warm climates(3)
Describe Yourself:
Homeowner(9)
 
I WOULD BUY THIS PRODUCT AGAIN.
By TomVerified Purchaser from Antioch, IL on 7/20/2010
Pros:
Easily Understood Instructions, Easy Installation, Simple Interface
Best Uses:
Cold Climates, Warm Climates
Describe Yourself:
Homeowner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

I have a 3 zone forced air HVAC system. One of the damper motors went bad and instead of calling a my furnace repair service, I wanted to see if I could change this on my own. Instructions were thorough and the change over was easy.

 
Better than the original equipment!
By Cal the Techno GeekVerified Purchaser from Helen, GA on 5/3/2010
Pros:
Easily Understood Instructions, Easy Installation
Best Uses:
Poor Air Quality
Describe Yourself:
Handyman, Homeowner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

Original actuator motor failed in my zoned HVAC system. I ordered this replacement and it works better than the original. It is quieter and appears to be more responsive to controller signals.

 
Easy as 1-2-3
By George8600Verified Purchaser from New Jersey on 1/31/2010
Pros:
Easily Understood Instructions, Easy Installation
Describe Yourself:
Homeowner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

It took about 2 minutes to install this part. Saved hundreds of dollars!

 
Easy Install
By JackoVerified Purchaser from Houston, TX on 1/12/2010
Pros:
Easily Understood Instructions, Easy Installation
Describe Yourself:
Homeowner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

It was very easy to replace my defective unit. You just need an allen wrench to install the new unit. Saved lots of $$$$ by doing it myself.

[1 of 1 customers found this review helpful]

 
Direct replacement for ARD actuator
By slamckVerified Purchaser from East Bay, CA on 12/30/2009
Pros:
Easy Installation
Describe Yourself:
Homeowner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

We have a three zone central cooling/heating system with six of these ARD actuators. Two of our actuators stuck in the close position. It was a easy five minutes job to replace each actuator. But make sure you have a 1/8 inch hex wrench which is required to replace the actuator.

 
[…] QUICK INSTALL.
By BOSSMANVerified Purchaser from WHEATON IL on 12/25/2009
Pros:
Simple Interface
Describe Yourself:
Handyman, Professional
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

EASY TO INSTALL WITH LITTLE ADJUSTMENTS, QUIETER THAN THE ORIGANAL.

 
Great purchase...Easy Install
By KenVerified Purchaser from Viera, FL on 8/4/2009
Pros:
Easy Installation
Best Uses:
Warm Climates
Describe Yourself:
Homeowner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

I saved several hundred dollars installing myself instead of a HVAC contractor.

 
[...]
By Captain JackVerified Purchaser from Gulf Shores, AL on 7/13/2009
Pros:
Easily Understood Instructions, Easy Installation
Best Uses:
Humid Climates
Describe Yourself:
Homeowner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

Very pleased with product. If there is one thing I could change, it would be to make it capable of full disassembly so that a broken spring could be replaced.

 
[...]
By KOVerified Purchaser from Ohio on 3/11/2009
Pros:
Easy Installation, Simple Interface
Describe Yourself:
Homeowner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

[...]

[3 of 5 customers found this review helpful]

 
Works good at a good price.
By WillVerified Purchaser from Orlando, FL on 5/26/2008
Pros:
Easily Understood Instructions, Easy Installation, Simple Interface
Best Uses:
Cold Climates, Dry Climates, Humid Climates, Poor Air Quality, Warm Climates
Describe Yourself:
Homeowner
Bottom Line:
Yes, I would recommend this to a friend

Comments about Honeywell Honeywell M847D1012 Replacement Damper Actuator Motor:

Used this item to replace a failed damper actuator motor. This is a quality OEM replacement at a good price. Total install time 5 minutes. [...]

Customer Reviews about the Honeywell M847D1012 Replacement Damper Actuator Motor at iaqsource.com
Powered by PowerReviews
Copyright © 2010 iaqsource.com All Rights Reserved. Do not republish contents.