(based on 1 rating)

Time based control of lighting, ventilating, heating, cooling or other electrical loads in commercial and industrial applications. The MIL 72 time switches come with a 24-hour dial with a SPDT switch (form “C” contact). The MIL 72A series is intended for surface mounting. The control is completely enclosed in a plastic housing and includes a terminal cover and sub-base for installation and hard wiring. Features • Synchronous drive or quartz drive with battery backup • 21A SPDT switch • Captive trippers with interval as low as 15 minutes • With or without 3-way override • Real clock face • Surface, flush, or DIN rail mount SPECIFICATIONS Size: MIL 72A: 2.83” x 4.0” x 2.06” MIL 72E: 2.83” x 2.83” x 1.36” Power Consumption: 1VA Switch: SPDT dry contacts, silver cadmium oxide Switch Rating: 21A 250V Resistive 1350 Watts Tungsten 1HP @ 120V 2HP @ 240V 16FLA, 96LRA–120VAC 12FLA, 72LRA–240VAC Minimum Switching Current: 100ma, 20V Ambient Temperature Range: –40°F to 180°F synchronous units –14°F to 131°F quartz units Wiring Connections: Screw Terminals Suitable for #10 to #24AWG INSTALLATION Stand Alone: With indoor or outdoor enclosure Panel: Surface, flush, or DIN rail mounting Furnish and install a Grasslin MIL 72____ 24 hour (7 day) time switch with 15 min. (2 hour) interval captive trippers and quartz (synchronous) drive. Input voltage shall be 120V (24V, 240V, 277V) and SPDT switch contacts shall be silver cadmium oxide rated at 21A, resistive, 2HP @ 250VAC. To set the starting time and to provide time indication, the unit shall incorporate an authentic clock face. Installation for surface, (flush, DIN rail or within indoor or outdoor enclosure) mounting. Time switch shall contain an OFF/AUTO/ON override. For Carry-over: The time controls shall have a quartz drive with 7 day reserve carry-over from a rechargeable battery.