Print This Page
Brand:
Honeywell
Located in:
Commercial Controls, Actuators
The Honeywell ML6161 Direct-Coupled, Non-Spring Return Damper Actuators are used to control dampers in applications such as variable air volume (VAV) terminal units, and for mounting on ball valves. Features: . Superior A/C synchronous submotor for consistent timing and actuator longevity. . Eliminate need for limit switches or mechanical stops by providing magnetic coupling. . All models include manual declutch lever, and bag assembly with two minimum position setscrews. . Mount directly on 3/8" or 1/2" square or round damper shaft. . Selectable 45, 60, and 90 stroke in either clockwise or counterclockwise direction. Specifications: Description: Non-Spring Return Direct Coupled Actuator Type of Control: Electric Feedback: With accessory only Electrical Connections: Screw terminals Stroke Max (deg, in): Adjustable w/accessory (30, 60, or 90 deg) External Aux. Switches Available: Yes Power Consumption: 2.04 VA Dimensions: 5-9/16"H x 3-3/8"W x 2-1/16"D (141 mm H x 86 mm W x 64 mm D) Mounting: 3/8" to 1/2" square or round shaft (9 mm to 13 mm) Approvals, Underwriters Laboratories Inc.: File E4436, Guide: XAPX2 Includes: 4074ENJ Bag Assembly
good product
By fili
from SLC,UT on 5/12/2011
from SLC,UT on 5/12/2011
Pros:
Easily Understood Instructions, Easy Installation, Simple Interface
Best Uses:
Preheat coil valve contrl
Bottom Line:
Yes, I would recommend this to a friend
Comments about Honeywell Honeywell ML6161A2009 Damper Actuator:
I installed it to control a water valve for a preheat coil. only took a couple of minutes and we were back running. it replaced a similar one that lasted several years of good service