Buy the Honeywell UV100E1043 UV Air Treatment System on http://iaqsource.com Print This PagePrint This Page
Honeywell UV100E1043 UV Air Treatment System image
 
(based on 1 ratings)
Brand: Honeywell
Located in: Air Quaility, UV Duct Lamps, Honeywell UV Duct Lamps
The Honeywell UV100E1043 Air Treatment System 70% Air Treatment Single Pass Kill Rate Recommended Application: Up to 1,600 CFM Honeywell Air Treatment Systems produce UV-C energy, emitting short-wave ultraviolet light that's proven to be a highly-effective germicide. The technology is widely used in hospitals, pharmacies, and kitchens to kill airborne and surface microorganisms like mold and bacteria. Now homeowners can benefit from UV products, too. Honeywell lamps are ozone free. They come with a five-year limited warranty. And lamp replacement is a snap. UV100E1043 Features SmartLamp circuitry - monitors bulb run time and lights LED indicator to provide a reminder on when to change the bulb Airflow sensor - turns on the lamp when air flow is present turns off the lamp 40 minutes after air flow has stopped. This extends bulb life. Honeywell Enviracom terminals - Enviracom allows the UV system to be controlled remotely or to send status information (must have other Enviracom devices). UV-C light kills airborne and surface bacteria. Continuously emits ultraviolet energy. UV lamp does not produce ozone. Sealed unit design prevents accidental installer and homeowner contact with the voltage and with the ultraviolet rays. Safe design prevents lamps from lighting unless the base is correctly mounted on the HVAC duct. Light pipe to safely view the lamp operation. Power cord that plugs into 120 Vac electrical outlet. Quick and easy lamp replacement. Easy lamp maintenance.
Review Snapshot®
Avg. Customer Rating:
 
1 star
(based on 1 review)

[7 of 10 customers found this review helpful]

 
Poor quality only lasted 4 yrs
By Ripsaw from Evansville, IN on 1/20/2009
Describe Yourself:
Homeowner
Bottom Line:

Comments about Honeywell Honeywell UV100E1043 UV Air Treatment System:

The UV100E1043 we own was part of the HVAC system on a new construction house we bought 3 yrs ago. Bought a replacement bulb from Iaqsource recently thinking dead bulb is why the unit stopped lighting. Followed bulb replacement procedure in UV100E1043 owner manual to the letter, still won't light. Used Multimeter to probe base unit's contacts for bulb handle-- no current. Probed the AC outlet the UV100E1043 is plugged into-- 120V AC indicated on the multimeter,i.e. outlet is functioning. Bulb is not getting any current from base unit when heating/cooling system is on. So this UV100E1043 lasted a big three years of service before it died. HVAC contractor wouldhave obtained the UV100E1043 about a year prior to our buying the house, so it should still be within the 5 yr warranty. We are going to try a warranty claim, but not holding our breath, doubt Honeywell will stand behind their product.

Powered by PowerReviews
Copyright © 2011 iaqsource.com All Rights Reserved. Do not republish contents.