Customers most agreed on the following attributes:
Comments about Fantech Fantech DBF4XLT Advanced Dryer Boosting Kit:
What I needed
Comments about Fantech Fantech DBF4XLT Advanced Dryer Boosting Kit:
This is a great product. Pressure switch is very sensitive so make sure you have the right model for your application. This one was a little too strong for the short vertical run (15') and had trouble getting the pressure switch set just right. Homeowner is very pleased. Went from 3 cycles to dry clothes to less than one full cycle.
Comments about Fantech Fantech DBF4XLT Advanced Dryer Boosting Kit:
The indicator light on this unit is wonderful! After the motor was installed, the indicator light let us know that there was restricted airflow in the vent. I called the duct cleaners and they removed lots of lint from my duct!! This could have resulted in a house fire or at the least a burned up clothes dryer motor. I am so happy to have a unit that has this feature!
[1 of 1 customers found this review helpful]
Comments about Fantech Fantech DBF4XLT Advanced Dryer Boosting Kit:
Have experienced excellent results so far. Product does exactly what its suppose to do. Installation was fairly straight forward. Clothes are now drying much faster. Very Happy!
[1 of 1 customers found this review helpful]
Comments about Fantech Fantech DBF4XLT Advanced Dryer Boosting Kit:
This fan works great. The dryer works much faster and more efficiently with the fan installed. The status light is a great feature.
Prompt delivery/good packaging.
[1 of 1 customers found this review helpful]
Comments about Fantech Fantech DBF4XLT Advanced Dryer Boosting Kit:
Cut my dry times by half.
Be careful where you screw the mounting bracket to the fan housing. If you go too far towards the center,
you can screw into the impeller.
[3 of 3 customers found this review helpful]
Comments about Fantech Fantech DBF4XLT Advanced Dryer Boosting Kit:
Fan mounting to the hanger bracket is poorly designed. When mounted to bracket with supplied self drilling/self tapping screws, the screws penerated into the fan wheel locking the rotor assembly. This happened after following the installation instructions. Also there is not way to remove burr that may occur when drilling for mounting. Yes I experienced a burr when the fan was started. The fan ran but whined/ticked until the burr either wore into the wheel or broke off from contact with fan wheel. After two starts and ten minutes of operation the fan run quite as expected.
There is not a normal operating procedure included in the provided instruction manual. There is a description of trouble sooting items but nothing on how the fan is supposed to operate. This fan's LEd lights brightly when the fan starts about 15 seconds after the dryer starts and then runs during dryer operation. The LED remains lit brightly after fan shuts down for about two minutes, the LED stays lit brightly but fan stops and then restarts after 30 seconds. The fan runs another two minutes and then shuts down.
Another item not included in the manual is that the LED stays lit at a low intensity after the fan has shut down. In a dark room the LED is visible.
If it all works correctly is hard to say right now. I would have thought the mounting screws would have been sized correctly and a complete description of normal operation would have been included.
[1 of 1 customers found this review helpful]
Comments about Fantech Fantech DBF4XLT Advanced Dryer Boosting Kit:
We would have to run our dryer extra long to dry our clothing sufficiently. The booster allows the dryer to run a normal cycle and dry the clothes completely. The lint trap is a must. It is amazing how much debris it catches