Print This Page
Customers most agreed on the following attributes:
from HOUGHTON LAKE, MICHIGAN on 11/30/2009
Comments about Proliphix Proliphix NT10e 1 Heat/1 Cool Programmable Internet Thermostat:
I installed this in my vacation home in northern Michigan. It is so much nicer to arrive to a warm house when it's 20 degrees outside. Installation was not difficult except to get the port forwarding thru my router. I called technical support at Proliphix. The tech was able to complete the installation & have me up & running in no time.
from FLorida on 9/21/2009
Comments about Proliphix Proliphix NT10e 1 Heat/1 Cool Programmable Internet Thermostat:
Stylish, easy to control a bit hard to wire but excellent product.
from Grand Lake, CO on 6/26/2009
Comments about Proliphix Proliphix NT10e 1 Heat/1 Cool Programmable Internet Thermostat:
I will use the NT10e to monitor and set temperatures for a second home in the mountains of Colorado.
from Santa Ana CA on 6/9/2009
Comments about Proliphix Proliphix NT10e 1 Heat/1 Cool Programmable Internet Thermostat:
WAN setup is tricky
[1 of 1 customers found this review helpful]
from Danville, CA on 1/7/2009
Comments about Proliphix Proliphix NT10e 1 Heat/1 Cool Programmable Internet Thermostat:
I have a vacation home in the mountains that is a log home. In the winter, the temperature drops to almost zero. I needed a thermostat that would maintain a constant temp. above freezing, and also allow me to heat up the home prior to the family's arrival. Since the warm up time can be as much as 4 hours, this product is perfect. I can adjust the temperature FROM MY IPHONE, and when we get there the home is toasty-warm.
I spent less than an hour installing the unit, and another hour or so configuring my router to make it accessible
This home needs an IP thermostat!
Tags: Using Product
[5 of 5 customers found this review helpful]
from New York on 5/20/2008
Comments about Proliphix Proliphix NT10e 1 Heat/1 Cool Programmable Internet Thermostat:
Although the hardware is well designed and fully functional, the software/firmware/web interface needs a little attention. Specifically, the web interface.
I typically install these units in summer homes, where the client needs to cool the house down before they arrive. I think that the web interface should offer the user a simple login screen followed by only the temperature adjustments for all of the users' devices, rather than the current 'screen o' numbers'. It's all perfectly functional now, but it just seems a bit overcomplicated when I explain to my client the steps required to change the temperature, and the fact that they have to do it for each device (some homes have 10 or 15 or more)
Reducing the amount of information on each web page would be a great start to reducing the clutter and confusion. The ability to change all of the devices at once is also high on my wish list.
If you only need one or 2 of these for your space, then the above issues are not a big deal. For systems with many zones however, it can take quite some time to go through each device, find the temperature adjustment page, change the temperature, submit the change, wait for the change to get accepted, then move on to the next one.
[7 of 7 customers found this review helpful]
from Long Island, NY on 4/15/2008
Comments about Proliphix Proliphix NT10e 1 Heat/1 Cool Programmable Internet Thermostat:
I installed two of these at a vacation home 1300 miles away. Wireless capability would make them perfect (although perhaps less reliable)- but as long as you can get a CAT-5 cable from the thermostat to your PC or router, you will be in business. All I need to do is log on and change the settings before I leave for the airport- and now arrive to a perfectly climate controlled home. The high/low temp email alert is a great feature as well.