(based on 2 ratings)

Braeburn Model 5400 Digital Programmable Thermostat with Humidification Control Universal Auto Changeover Up to 3 Heat / 2 Cool, with Humidification Control / Programmable or Non-Programmable FEATURES: • 7 Day, 5-2 Day Programming or Non-Programmable • Dual Powered–Hardwired or Battery • Two Outside Air Modes–Economizer and Time of Day • Programmable Humidification and Dehumidification with Fan Speed Control • Large Display with Bright Blue Backlight • Simple Menu-Driven Programming • Separate Installer and User Setup Modes • Residential or Commercial Program Modes • Programmable Independent Fan Control with Recirculation Feature • Multi-Level Keypad Lockout • Non-Volatile Memory to Maintain User Settings • Remote Indoor / Outdoor Sensor Compatible • Residual Cooling Fan Delay • Filter, UV and Humidifier Pad Check Monitor • Adaptive Recovery Mode (ARM™) • Auxiliary Heat Fossil Fuel Programming Option • 1st, 2nd and 3rd Stage Adjustable Temperature Differential • ESD Guard™ Electronic Circuitry • Compressor Short Cycle Protection • Compressor Power Outage Protection • Separate Heating and Cooling Program Set Point Times and Temperatures • Temporary Program Override up to 4 Hours or Until Next Set Point • Programmable Extended Hold Mode • Programmable AC Monitoring • Installer Clear Button and Front Access Reset Button • Heat Pump Fault Detection • Gas or Electric Fan Control • Easy Access Front Battery Door • Meets ENERGY STAR® and California Title 24 Guidelines SPECIFICATIONS: Dimensions: 4.63” x 5.00” x 1.20” Electric Rating: 24 Volt AC (18-30 Volt AC) 1 amp maximum load per terminal 6 amp total maximum load (all terminals) AC Power: 18-30 Volt AC DC Power: 3.0 Volts DC (2 “AA” Alkaline batteries included) Compatibility: Single stage or Multi-stage heat / cool systems including heat pumps with up to three stages of heating and two stages of cooling 250mv – 750mv millivolt heating systems Control Range: 45° to 90° F (7° to 32° C) Display Range: 40° to 99° F (5° to 37° C) Accuracy: +/- 1° F (+/- .5° C) Temperature Differential: 1st Stage - .5°, 1°, or 2° F (.25°, .5°, or 1° C) 2nd and 3rd Stage - 1°, 2°, 3°, 4°, 5°, or 6° F (.5°, 1°, 1.5°, 2°, 2.5°, or 3° C) Storage Temperature: 14° to 140° F (-10° to 60° C) Operating Humidity: 5% to 95% Relative Humidity Terminations: A/D, H, G, Rc, Rh, W2, B, O, Y1, Y2, W1/E/W3, C, L, S1, S2