You Are Here: Home > Products > Taco Pumps

Taco Pumps

Taco Water Circulation products include circulators, pumps and accessories typically used for the circulation of water for heat transfer in a wide range of residential and light commercial applications.
Choose a related category below

Cast Iron Circulator Pumps

Standard cast iron circulator pumps that we normally stock.
Taco manufactures hundreds of pump models that are available, if you are not finding what you are looking for please contact us, we will be glad to help.

Bronze Circulator Pumps

Bronze pumps are used in open air applications. Typically seen in open loops, domestic hot water recirculation and poor water quality conditions.

IFC Circulator Pumps

A removable Integral Flow Check (IFC®) is standard to simplify piping, prevent gravity flow/reverse flow, and improve system performance.

Cast Iron Zone Pumps

The patented Taco Priority Zoning Circulator combines the reliability of the “00” circulator with the convenience and efficiency of a switching relay. With a built-in transformer, relay and priority switch, all the wiring is done directly to the circulator’s PC board, making it ideal for adding a zone or an indirect hot water heater.

Cast Iron IFC Zone Pumps

The patented Taco Priority Zoning Circulator combines the reliability of the “00” circulator with the convenience and efficiency of a switching relay. With a built-in transformer, relay and priority switch, all the wiring is done directly to the circulator’s PC board, making it ideal for adding a zone or an indirect hot water heater. Paired with a removable Integral Flow Check (IFC®) is standard to simplify piping, prevent gravity flow/reverse flow, and improve system performance.

Flanges

Taco Freedom Flanges fit all “00” Circulators and free you from scraped knuckles and jury rigged tools. Easy-On/Easy-Off and sweat designs, and two-piece bronze shut-off valves let you make quick work of pump installation and maintenance.

Domestic Hotwater Recirculation Pumps

It’s a common problem: turn on the faucet or shower for hot water, then wait for it to arrive. In fact, the wait can be up to two minutes in larger homes with multiple bathrooms and long runs of pipe between the plumbing fixtures and the water heater! With a Taco Domestic Hot Water Recirculation System in place, there’s no more wait. Instant hot water!

Radiant Mixing Block

The Taco Radiant Mixing Block represents a breakthrough in the design, control and installation of radiant systems. The patent pending design combines a variable speed injection mixing control, injection circulator, system circulator, and air elimination into a single unit. Extremely versatile, the Radiant Mixing Block can be set up as an outdoor reset control, a setpoint control or a delta T limiting control. All this with no special piping, no balancing valve, no closely spaced tees, no external controls, no complex wiring; just four pipe connections and your installation is complete. Welcome to the new age of Radiant!

X-Pump Block

Open system vs closed? Barrier vs non-barrier tubing? Boiler vs water heater?

The debate ends here. The patent pending X-Pump Block combines a variable speed mixing control, heat source circulator, system circulator, and heat exchanger into a single unit. This combination delivers complete isolation between the heat generation side of the system (boiler, water heater, etc.) and the heat delivery side of the system (radiant tubing, glycol based snowmelt, baseboard, etc.). Just four pipe connections and your installation is complete.

Taco Pump Parts

High Quality Parts for Taco Pumps