IAQSource.com > Articles > Upgrade your old Broan, Nautilus, or NuTone Bathroom Fan

Upgrade your old Broan, Nautilus, or NuTone Bathroom Fan



The new Broan / NuTone model 690 economy bath fan upgrade kit is now available on IAQSOURCE.COM and BATHROOMFANEXPERTS.COM

Are you tired of your noisy and ineffective "builder-grade" fan but don't have the time or expertise to replace the whole thing?

Thousands of Broan and Nutone economy fans have been installed by home builders for the last 10-15 years.  Builders have opted to use these fans because they are cheap and readily available from the local suppy house. 

Problems with these cheap fans include:

  • They are noisy because their motor assemblies have outlived their useful life
  • Their grilles are dirty and discolored
  • The do not move enough air to be effective in lowering humity in the bathroom

Furthermore - homeowners lack the skills necessary to cut into sheetrock and framing, rewire a fan, and reconnecti the ductwork.  In a downstairs bathroom, it seems almost impossible to upgrade your fan as there is no access from above.

With this new kit - it is easy to upgrade your Broan, Nutone, or Nautilus fan.  The process takes around 10 minutes and you are left with a fan that reduces sound by 50% and increases performance by 20%.  You also get a brand new grille that can be painted to match the decor in the bathroom.

Upgrade your old fan today!

See chart below for compatibility info.  This unit must be installed into fan housings that are marked "D-Housing" or "690" Series. Other fan housings cannot be substituted. For use only with Broan fan models 670, 671, 688, 689 and Nautilus fan models N671, N688 and NuTone fan models 693, 695, 696N.  Refer to the table below to double-check that your fan is a candidate for upgrade. Measure the fan housing and compare with dimensions below.

Broan 690 Upgrade Kit replaces the models below:
If your grille looks like this:
 
The fan is very likely one of these models:
 
Housing Dimensions:
Broan
670, 671, 688, 689

Nautilus
N671, N688

7-1/2"x7-1/4" only

* 8" x 8-1/4" are not compatible

 

NuTone
693, 695, 696N
7-1/2"x7-1/4"
or
8"x7-1/4"